Q: I've lost the Frame Relay config. Do you have it handy?

A: Yes, here is where we keep such things: Click Here

Q: What happens during the 1/2 hour period between sessions?

A: Expert-labs.com is programmed to reset the configuration on all the equipment. Passwords are changed at the end of the cleanup period for the next user. The default configurations for all routers are just a hostname except for R6, which has a Full Frame-Relay Mesh; Default configurations are loaded before every sessions with the exception of the following: If a user has two or more consecutive timeslots, no cleanup is performed, the session is automatically extended and the cleanup period is waived.

Q: I can't get my serial links to work!

A: Because we use back-to-back serial connections, you have to configure the DCE end with a clock rate. See the Lab Diagram for DCE cable ends. All Frame Relay Server Ports are DCE.

Q: I can't get my ATM SVC or ISDN config to work. Can I see a working config example?

A: Refer to the following forum: Click here

Q: How to I access the TFTP server?

A: It is plugged into port 18 on SW2, and it's IP address is 192.168.150.100/24. Also, you can view the contents of the TFTP directory here: http://lab.expert-labs.com/tftp/

Q: What happens when I cancel a session that I already paid for?

A: When you cancel a session that you paid for, credit is applied to your account. You can then use this credit to schedule free sessions. How can view how much credit you have by clicking Here